MODS/PARTS
AIR INTAKE
PULLEYS
OVERSIZE PULLEYS
Manufacturer
Specifications/Details
| HKS | 12mm oversize, 10PSI, No modification needed for installation. |
| Blitz - Pic | 15mm oversize, 12PSI, Must bend Timing-Pointer 30deg. out. |
| Cusco - Pic | 17mm oversize, 14PSI, Must remove Timing-Pointer and replace with supplied one. Must also replace idler pulley. |
| Unorthodox Racing | |
| TBS - Pic | |
| Dragon - Pic | I believe this is good for 30hp |
| Jam Sport - Pic | I believe this is good for 30hp |
| PYR Racing | Custom Supercharger Pulleys |
* IMPORTANT - After replacing your stock pulley, make sure you perform the ABV-Mod so that you can realize the potential of your new pulley. This Mod will allow you to run higher boost.
